:: Flying Way ::

:: Flying Way :: (https://www.flyingway.com/vb/index.php)
-   هندسة وصيانة الطائرات Engineering & Aircraft Maintenance (https://www.flyingway.com/vb/forumdisplay.php?f=13)
-   -   Work Place Safety (https://www.flyingway.com/vb/showthread.php?t=2269)

ولد قطر 29-07-2006 12:57 AM

Work Place Safety
 
السلام عليكم ورحمة الله وبركاته

طبعا اهم شي في عالم الطيران هو الأمان فكل مجالاته ... وحبيت أضيف موضوع كتابه او إنشاء أنطلب مني في امتحان
Aircraft Maintenenance Practices
وإتمنى من شباب او طلبة هندسة الطيران ان ياخذون فكره عن طريقة الكتابه والطريقه او الأسلوب الي اتبعه هو اني اركز على النقاط المهمه Key point والبدء بالشرح عن كل نقطه وما ننسى بعد المقدمه وخاتمة الموضوع .
وهذا هو موضوعي عن Work Place Safety
Safety is the primary factor that sould be followed every where , and especially in the work place.Many accident ocur due to ignorence , careleness and horseplay . One should always remamber that he is responsible for his safety and those who are working around him .One must also be conscious when working with any equipment in the workplace. Secondly one should never follow his own method , but always the method as described in the instrution.So if you want to be in the safe side you must remamber never to fool around the workplace ,because you might injour yourself by tripping over something . You should never disrespect or mis handle your tools you are working with . Also you must be tidy while working and you should clean your place after you have finished your work .Accidents occur because some people use equipment without Knowing how to start it or stop it . In every workplace there is apalce for every thing for example tools must be on the shadow bord or tool box , gas cylinder must be placed standing against the wall and boundled with chain so they never fall on the floor . There are many workshop equipped with fire alarms to detect fire so that mean never try to smoke in the workshops . Finally you must remeber there are demarcated areas you should never put any objects there . Areas that are demarcated lead to exits , emergancy exits , first aid box and fire extinguisher .
وهذا مثال لمواضيع الإنشاء او الكتابه ونصيحتي لطلبة هندسة الصيانه انهم يهتمون بالنقاط المهمه والكتابه بخط واضح وسهل القرائه وإنشاء الله يتوفقون .

وهذي بعض الصور للورش وانلاحظ اللبس الصحيح والنظارات والكمامات الواقيه ألي يلبسها المهندسين والفنين اثناء عملهم.

https://www.emiratesengineering.com/i...Airframe01.jpg

https://www.emiratesengineering.com/i...Airframe02.jpg

وهذا مقطع فيديو مفيد يعطي فكره عن شفل مهندسين الصيانه

https://www.emiratesgroupcareers.com/...m97-121403.wmv

Flying Way 30-07-2006 03:50 AM

مشاركة Work Place Safety
 
يعطيك الف عااافية اخوي ولد قطر ع الموضوع

ولد قطر 31-07-2006 01:20 AM

مشاركة Work Place Safety
 
الله إعافيك أخوي هشام وشكرا على مرورك

mechanic 31-07-2006 07:36 PM

مشاركة Work Place Safety
 
اقتباس:

المشاركة الأصلية كتبت بواسطة ولد قطر
One should always remamber that he is responsible for his safety and those who are working around him .One must also be conscious when working with any equipment in the workplace. Secondly one should never follow his own method , but always the method as described in the instrution.

يعطيك العافية أخوي ولد قطر على هالموضوع الرائع جداً

تحياتي لك

أخوك

Mechanic

ولد قطر 31-07-2006 10:26 PM

مشاركة Work Place Safety
 
الله إعافيك وشكرا على المرور اخ Mechanic

omani84 27-11-2006 08:50 PM

مشاركة Work Place Safety
 
مشكور أخي ولد قطر
معلومات مهمة جدا وبارك الله فيك


الساعة الآن 11:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

حق العلم والمعرفة يعادل حق الحياة للأنسان - لذا نحن كمسؤلين في الشبكة متنازلون عن جميع الحقوق
All trademarks and copyrights held by respective owners. Member comments are owned by the poster.
خط الطيران 2004-2024