[Cpt.Mohammed Alaa]

السلام عليكم و رحمة الله و بركاته

اليوم ألقاكم مع واحده من أهم الطائرات و هى الطائره المنتظره من إنتاج شركة Aerosoft العملاقه إنها :

Aerosoft Airbus X



الإضافه التى إنتظرها عشاق السميليتور عامة و الإيرباص خصوصاْ و التى صدرت أمس بعد طول إنتظار الآن إليكم و حصرياْ على منتديات خط الطيران قبل الجميع ..



Manuals/Documentation: Normal Checklist, PF/PNF Procedure guide, Systems Manual, Normal Procedures Manual. Over 120 pages (available in formats for smart phones and iPad), available in English, French, Spanish, German, Dutch and Russian.
Coming: soon => Virtual Airlines: There will be a reduced price option for VA pilots of VA’s that have a contract with Aerosoft (contact [email protected] for that).
Extensive animations: sunshades, standby compass, APU door, pullout tables, observer seat, windows, windshield wipers (individual on both sides, two speed), passenger and cargo doors, landing lights, wind milling engines (depending on wind direction and strength), Ground Power Unit (will power the aircraft), traffic cones, chocks (will act as parking brakes), Custom coded Spoiler/speed brake animation. All animations come with sound effects. Of course all the standard things like gears and flight control surfaces are animated.
Load/Save aircraft state module: easy to use module that saves all aircraft settings, includes presets for cold & dark, taxi, takeoff, cruise.
Compatibility: comes prepared for AES, uses default FSX standards wherever possible to stay compatible with other add-ons and hardware. Note: throttle is read from DirectX, bypasses FSX completely, to avoid FSX related problems.
Models / Engines / Liveries: A320 with IAE and CFM engine, A321 with IAE and CFM engine, (systems based on IAE standards). Iberia, Niki, BA, US Airways, Air Berlin, Air France, Alitalia and Lufthansa included, dozens of other paints available shortly after release.
Sounds: High definition (FSX standard) sound set, with additionally over 100 sounds for VC.
Installation: Easy installer and no complex DRM schemes or Online installers.
Lighting: Advanced non standard lighting system (landing lights, taxi way turn off lights, nose wheel taxi light, nose wheel take-off light) that actually light up the scenery around the aircraft.
Frame rates: Frame rates are comparable to default FSX airbus (that has 1/5th the polygons and almost no detailed systems).
Paint kit: Available on release, highly advanced.
Extensibility: Very open in design (all systems in XML etc) and Aerosoft invites people to change and extend this product.
Airbus X Connect: Stand alone application
Load manager: Makes it easy to load passengers, cargo and fuel
TakeOff datasheet: Calculates Vspeed and FLEX settings
Flight Following: Use any device with a browser (like Smartphone, iPod etc) so you can go on with your life as the Airbus cruises.
Systems:
Air conditioning: full automatic and manual modes, including 3 separate zones, zone controller, pack controller, pack flow controller, hot air pressure regulator, engine bleed controller, APU bleed controller. Full feedback on ECAM COND and BLEED pages.
Pressurization: full automatic using 6 control modes with cabin pressure controllers, outflow valve actuator, control panel and safety valves. All indications on PRESS and DOORS ECAM.
Avionics Ventilation: full automated mode using the Avionics Equipment Ventilation Controller (AEVC) with valve indication on ECAM.
Landing Gear/Brakes: Full manual control, auto brakes, anti-skid, brake fans. Full indications on the main panel, ECAM WHEEL page, ACCU pressure gauge.
Standby instruments: compass (drops from overhead panel), horizon, DDRMI and clock/timer.
Seatbelt/ No Smoking: full automated and semi automated modes, including 10.000 feet auto switch.
ECAM: all pages (ENG, BLEED, PRESS, ELEC, HYD, FUEL, APU, COND, DOOR, WHEEL, F/CTL) included with all, status, recall and clear functions. T.O. CONFIG simulation fully supported and all pages will automatically show when needed.
Master Caution/ Master Warning: fully operational, including audio and reset.
Communication: Two VOR (with tuning by entering the name), Transponder and two ADF radios implemented in MCDU. Two VHF and Audio Control panel. Fully compatible with Go Flight, Saitek, VR Insight etc without any additional software.
Flight controls: two ELAC, two FAC and three SEC computers, with mechanical flight control backup, operating under normal law protection (load factor limitation, pitch attitude protection, high AoA protection, high speed protection). Full FBW system. Speed brakes and spoiler with ground spoiler control system. All flight controls fully linked to hydraulic systems. Fully featured ECAM F/CTL page. Slats and Flaps systems fully featured and fully compatible with all additional hardware.
TCAS: Fully implemented with 4 threat levels (default, proximate TA, RA) in navigation display, including sounds.
Navigation: Uses updatable Navigraph navigation database.
MCDU features:
Main menu:
Aircraft status
Panel state Load/save module with preset:
Cold & Dark
Ready to taxi
Ready for take off
Cruise
User setups
Doors and equipment:
Opening doors and cargo holds
Cones and wheel chocks
External power cart (visible & invisible for AES)
INIT A and B:
DEP/ARR airport entry
Managed cruise altitude
ZFW and Block fuel entry
PERF pages:
Take Off
V-speed entry (manual or auto calculated)
Transition altitude
Take off flaps position
Flex temperature
Climb
Cruise
Descend
Approach:
Decision height
Minimum descend altitude
Progress page
Fuel prediction page
Data page with GPS
IRS position monitor
Nearest airport list
Flightplan page
Direct-to page
Radio navigation page
VOR, ILS , ADF radio tuning and course setting
Flight planning: Flight plans can either be loaded via the standard FSX flight planner or entered manually. Flight plans made by 3rd party tools (FSBuild, FS Commander etc) can be imported as long as they can be exported to standard FSX flight plans.
Flight control unit (autopilot) features:
Selected modes:
Auto throttle speed
Heading
Altitude
Vertical speed
Managed modes:
Auto throttle speed set according to altitude
LNAV Managed lateral mode, follows MCDU flight plan
VNAV Managed vertical mode: note that VNAV is simplified to be easier to use.
Sets both speed and climb behavior according to aircraft altitude
Starts descend automatically when reaching TOD
Navigation display features:
ILS, VOR, NAV, ARC and PLAN modes
Range settings: 10-320nm
Flight plan with waypoints
TCAS information
ADF/VOR info
GPS Intersections, NDB’s, VOR’s and Airports can be selected for display
Primary Flight Display features:
Artificial horizon
Airspeed and altitude
Autoflight settings
ILS info
V-speeds
Flaps, slats and gear retraction/extension speeds
VMO (max speed)
Alpha floor and alpha max speed tape
Green Dot, Vmax, Vls, Vapp, and many more speed tape indicators

System requirements:
Microsoft Flight Simulator X (SP2, Acceleration or Gold Edition)
Windows XP / Vista (32Bit or 64Bit) / Windows 7 with the latest Service Packs
Microsoft Visual C++ 2005 + SP1 Redistributable Package
Microsoft Visual C++ 2008 + SP1 Redistributable Package
Intel Core 2 Duo CPU (2x 2666Mhz) or equivalent (Core 2 Quad CPU recommended)
2 GB RAM
DX9 Graphic Card with at least 256 MB (512 MB highly recommended)
Mouse with mouse wheel
Joystick with throttle
Download-Size: 240 MB
Installations-Size: 500 MB


الصـــــور :



























































Size : 197 Migabyte

Download


بعد التحميل نقوم بنقل التالى :

1- مجلد Aerosoft فى ملف Microsoft Flight Simulator X

2- محتويات مجلد Effects فى ملف الـEffects

3- محتويات مجلد Modules فى ملف الـModules

4- مجلد Navigraph فى Microsoft Flight Simulator X

5- ما بداخل الـSimObjects/Airplanes إلى SimObjects/Airplanes فى ملف Microsoft Flight Simulator X

6- قم بنسخ هذه الأسطر إلى ملف dll.xml و الموجود فى C:\Users\User Name\AppData\Roaming\Microsoft\FSX ( لمستخدمين ويندوز فيستا و 7 ) أو Documents and Settings\User Name\Application Data\Microsoft\FSX ( لمستخدمين ويندوز أكس بى ) و يتم فتحه بواسطة الـNotepad مع الحفاظ على </SimBase.Document> كنهاية للملف ! :

<Launch.Addon>
<Name>GPS Module</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Modules\GPSModule.dll</Path>
<DllStartName>module_init</DllStartName>
<DllStopName>module_deinit</DllStopName>
</Launch.Addon>

جزيل الشكر و تحياتى إليكم حتى أراكم بخير مع إضافه جباره أخرى إن شاء الله ...